530UB82.0 Universal Beam
AS/NZS 3679.1Grade 300The 530UB82.0 is a universal beam to AS/NZS 3679.1. It is 528 mm deep with a 209 mm wide flange, has a mass of 82.0 kg/m and a gross area of 10501 mm². Its major-axis second moment of area is Ix = 477 × 10⁶ mm⁴ and in Grade 300 (fy = 300 MPa) its section moment capacity is φMsx = 557.8 kNm. Download its free DXF drawing (a true-scale CAD outline) below, or print the dimensioned drawing sheet.
Also written as: 530 UB 82.0, 530UB82, 530 UB 82
Open the drawing full size (pinch to zoom)
Dimensions
| Symbol | Property | Value | Unit |
|---|---|---|---|
| d | Depth of section | 528 | mm |
| bf | Flange width | 209 | mm |
| tf | Flange thickness | 13.2 | mm |
| tw | Web thickness | 9.6 | mm |
| r1 | Root radius | 14.0 | mm |
| d1 | Clear web depth (d − 2tf) | 501.6 | mm |
Section properties
| Symbol | Property | Value | Unit |
|---|---|---|---|
| m | Mass per metre (nominal) | 82.0 | kg/m |
| Ag | Gross cross-section area | 10501 | mm² |
| Ix | Second moment of area about x-axis | 477 | 10⁶ mm⁴ |
| Zx | Elastic section modulus, x-axis | 1807 | 10³ mm³ |
| Sx | Plastic section modulus, x-axis | 2066 | 10³ mm³ |
| rx | Radius of gyration, x-axis | 213.1 | mm |
| Iy | Second moment of area about y-axis | 20.1 | 10⁶ mm⁴ |
| Zy | Elastic section modulus, y-axis | 193 | 10³ mm³ |
| Sy | Plastic section modulus, y-axis | 301 | 10³ mm³ |
| ry | Radius of gyration, y-axis | 43.8 | mm |
| J | Torsion constant | 526 | 10³ mm⁴ |
| Iw | Warping constant | 1334 | 10⁹ mm⁶ |
| As | External surface area per metre | 1.849 | m²/m |
| As/t | External surface area per tonne | 22.5 | m²/t |
Axes: x-x is the major axis and y-y the minor axis, both through the centroid.
Design capacities to AS 4100
| Symbol | Property | Value | Unit |
|---|---|---|---|
| Steel grade | 300 (AS/NZS 3679.1) | ||
| fy | Yield stress used | 300 | MPa |
| fu | Tensile strength | 440 | MPa |
| kf | Form factor (Cl. 6.2.2) | 0.902 | |
| Section class, x-axis (Cl. 5.2) | Compact | ||
| Zex | Effective section modulus, x-axis | 2066 | 10³ mm³ |
| φMsx | Section moment capacity, x-axis | 557.8 | kNm |
| Section class, y-axis | Compact | ||
| Zey | Effective section modulus, y-axis | 289 | 10³ mm³ |
| φMsy | Section moment capacity, y-axis | 78.0 | kNm |
| φNs | Section compression capacity (Cl. 6.2.1) | 2557 | kN |
| φNt | Tension capacity, gross section (Cl. 7.2, kt=1, An=Ag) | 2835 | kN |
| φVv | Shear capacity (Cl. 5.11) | 821 | kN |
| αb | Compression member section constant (Table 6.3.3) | 0 |
| Le (m) | φMbx (kNm) | φNcx (kN) | φNcy (kN) |
|---|---|---|---|
| 0.5 | 558 | 2557 | 2557 |
| 1 | 558 | 2557 | 2469 |
| 1.5 | 537 | 2557 | 2358 |
| 2 | 506 | 2557 | 2231 |
| 2.5 | 471 | 2557 | 2077 |
| 3 | 434 | 2548 | 1892 |
| 3.5 | 395 | 2527 | 1684 |
| 4 | 358 | 2506 | 1470 |
| 5 | 292 | 2463 | 1092 |
| 6 | 240 | 2419 | 818 |
| 7 | 199 | 2373 | 628 |
| 8 | 169 | 2324 | 494 |
| 9 | 145 | 2271 | 398 |
| 10 | 127 | 2215 | 328 |
| 12 | 101 | 2088 | 232 |
φMbx: AS 4100 Cl. 5.6.1.1 with αm = 1.0; Le = ktklkrL. φNc: Cl. 6.3.3, pin-ended effective length Le = keL, concentric load.
Check it for a span and loads with the beam calculator.
For restraint types, ktklkr and αm, use the lateral restraint calculator.
Instant check only. Effective lengths and moment modification factors must be determined by the designer in accordance with AS 4100 Cl. 4.6, 5.6.3 and 6.3.2. Not a substitute for a qualified engineer: see the disclaimer.
Alternatives with similar bending capacity
Sections from other families with a plastic modulus Sx within −8% / +25% of the 530UB82.0, lightest first.
| Section | Type | Mass (kg/m) | Sx (10³ mm³) | Ix (10⁶ mm⁴) |
|---|---|---|---|---|
| 457.0x9.5CHS | Circular Hollow Section | 105.0 | 1903 | 334 |
| 508.0x9.5CHS | Circular Hollow Section | 117.0 | 2361 | 462 |
| 310UC118 | Universal Column | 118.0 | 1962 | 278 |
| 400x400x10.0SHS | Square Hollow Section | 120.0 | 2214 | 382 |
| 406.4x12.7CHS | Circular Hollow Section | 123.0 | 1969 | 305 |
| 400x300x12.5RHS | Rectangular Hollow Section | 128.0 | 2226 | 370 |
Other universal beams
Relevant Australian Standards
- AS/NZS 3679.1:2016 Structural steel – Part 1: Hot-rolled bars and sections
Specifies chemical composition, mechanical properties and tolerances for hot-rolled universal beams and columns, channels, angles, flats and bars in Grades 300 and 350. - AS 4100:2020 Steel structures
The Australian design Standard for steel members and connections. Covers section classification (Section 5), member moment capacity including lateral-torsional buckling (5.6), shear (5.11), axial compression (Section 6), tension (Section 7) and combined actions (Section 8). - AS/NZS 5131:2016 Structural steelwork – Fabrication and erection
Fabrication, erection, tolerances, inspection and construction categories (CC1–CC4) for structural steelwork. - AS/NZS 2312.1:2014 & 2312.2:2014 Guide to the protection of structural steel against atmospheric corrosion
Part 1 covers protective paint coatings and Part 2 hot-dip galvanizing; both use the external surface areas given on each section page.
See all Australian Standards for structural steel.
Properties are calculated from nominal dimensions, including root and toe radii, as described in notation & method. Mass is the nominal catalogue mass; the calculated mass at 7850 kg/m³ is 82.43 kg/m. Verify against current manufacturer literature before use in design. Spotted an error? Report it.